بررسی تاثیر عملیات حرارتی بر ساختار و خواص پوششهای کبالت-کروم
General Material Designation
[پایاننامه]
Parallel Title Proper
Investigation of the Effect of Heat Treatment on the structure and properties of Co-Cr Coatings
First Statement of Responsibility
/علی مردانیفر
.PUBLICATION, DISTRIBUTION, ETC
Name of Publisher, Distributor, etc.
: مهندسی مواد
Date of Publication, Distribution, etc.
، ۱۳۹۸
PHYSICAL DESCRIPTION
Specific Material Designation and Extent of Item
۸۴ص.
Other Physical Details
:
GENERAL NOTES
Text of Note
زبان: فارسی
NOTES PERTAINING TO PUBLICATION, DISTRIBUTION, ETC.
Text of Note
چاپی
NOTES PERTAINING TO PHYSICAL DESCRIPTION
Text of Note
مصور، جدول، نمودار
DISSERTATION (THESIS) NOTE
Dissertation or thesis details and type of degree
کارشناسی ارشد
Discipline of degree
مهندسی مواد- خوردگی و حفاظت از مواد
Date of degree
۱۳۹۸/۰۶/۰۱
Body granting the degree
صنعتی سهند
SUMMARY OR ABSTRACT
Text of Note
در این پژوهش، پوشش کبالت-کروم حاصل از حمام سولفاتی کروم سه ظرفیتی با ضخامتی در حدود إm۲۰-۲۴ با اعمال جریان مستقیم بر روی فولاد ساده کربنی(st۳۷) آبکاری شد .هدف از این پروژه بررسی تاثیر عملیات حرارتی بر سختی و مقاومت به سایش و خوردگی پوششهای کبالت-کروم است .برای این منظور، نمونهها بلافاصله از آبکاری، وزن شده سپس در داخل کوره با دماهایC ۸۰۰ -۲۰۰ قرار گرفتند و مورفولوژی و ریزساختار و میکروسختی و رفتار تریبولوژیکی و رفتار مقاومت به خوردگی پوششها مورد بررسی قرار گرفتند .ساختار پوششها توسط آزمون XRD و مورفولوژی، سطح مقطع و ترکهای موجود در پوشش توسط تصاویر SEM بررسی شد .نتایج میکروسختی نشان میدهد که عملیات حرارتی به صورت کلی باعث افزایش میکروسختی پوشش کبالت-کروم میشود و بیشترین سختی پوشش کبالت-کروم مربوط به نمونه عملیات حرارتی شده در دمایC ۴۰۰ و کمترین میزان سختی مربوط به نمونه عملیات حرارتی شده در دمایC ۲۰۰ با سختی به ترتیبHv ۲۰۰ ۱۰۲۰وHv ۲۰۰۴۴۰ میباشد .همچنین دیده شد که نمونه عملیات حرارتی شده در دمایC ۴۰۰ دارای کمترین میزان ضریب اصطکاک و وزن از دسترفته است .نتایج آزمونهای پلاریزاسیون و امپدانس الکتروشیمیایی نشان داد که نمونه عملیات حرارتی شده در دمایC ۴۰۰ دارای بیشترین مقاومت به خوردگی با دانسیته جریان خوردگی و مقاومت پلاریزاسیون به ترتیبA/cm ۲إ ۲.۱۳-۱۰ و.cm۲۳۰۰۰۰.
Text of Note
Cr coating was deposited from Cr (III) based electrolyte on st-In this study, Co۳۷ substrate using direct current. The thickness of coatings was about ۲۰ to ۲۴ إCr coatings. To achieve this goal, immediately after coating process, coated samples were heat treated at different temperatures ranging from -m. The aim of this work is to investigate the effect of heat treatment on hardness, tribological behavior and corrosion behavior of Co۲۰۰ to C۶۰۰ for C۳۰Cr coating and the sample which was heat treated at -Cr coatings were studied. Micro hardness results exhibited that heat treatment in general increase the hardness of Co-min and morphology, microstructure, micro hardness and then tribological behavior of Co۴۰۰Cr coating was about -deposited Co-Cr coating and the resistance. The hardness of as-C had the highest hardness of Co۶۵۰Hv ۲۰۰ which was increased to ۱۰۲۰Hv ۲۰۰ by heat treated at ۴۰۰ C. Impedance and polarization results showed that the sample which was heat treated at۴۰۰ had the best corrosion resistance that Icorr and Rp were respectively C۲.۱۳-۱۰ إA/cm۲, ۳۰۰۰۰.Cm ۲.
ba
PARALLEL TITLE PROPER
Parallel Title
Investigation of the Effect of Heat Treatment on the structure and properties of Co-Cr Coatings