کاربرد روش تشخیص ترکیبی عناصر غذایی (CND) برای ارزیابی وضعیت تغذیه گندم و مقایسه آن با روشهای DRIS و DOP و اعتبارسنجی نرمهای حاصل) مطالعه موردی مزارع کشت و صنعت مغان(
عنوان اصلي به زبان ديگر
Application of compositional nutrient diagnosis (CND) method to assess wheat nutrition status and comparison with the DRIS and DOP methods and validation of obtained norms case study: (field of Moghan Agro Industrial Company)
نام نخستين پديدآور
/ابوالفضل گیکلوی
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
: کشاورزی
تاریخ نشرو بخش و غیره
، ۱۳۹۷
نام توليد کننده
، میرزائی
مشخصات ظاهری
نام خاص و کميت اثر
۱۷۷ص
یادداشتهای مربوط به نشر، بخش و غیره
متن يادداشت
چاپی - الکترونیکی
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
دکتری
نظم درجات
علوم خاک گرایش شیمی و حاصلخیزی خاک
زمان اعطا مدرک
۱۳۹۷/۰۶/۲۰
کسي که مدرک را اعطا کرده
تبریز
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
گندم مهمترین محصول غذایی برای بیشتر مردم جهان است .هدف این پژوهش بررسی وضعیت تعادل عناصر غذایی گندم منطقه مغان از طریق روش تلفیقی تشخیص و توصیه(DRIS) ، روش تشخیص ترکیبی عناصر غذایی(CND) ، روش انحراف از حد بهینه (DOP) و روش نسبت لگاریتم ایزومتریک (ilr) بود .بعد از انتخاب ۹۶ مزرعه گندم از منطقه مغان، از برگ پرچم در مرحله رشدی شکمی در سال زراعی ۱۳۹۴ نمونهصبرداری انجام شد و غلظت عناصر غذایی نیتروژن(N) ، فسفر(P) ، پتاسیم(K) ، کلسیم(Ca) ، منیزیم(Mg) ، آهن(Fe) ، روی(Zn) ، مس(Cu) ، منگنز (Mn) و بور (B) در آزمایشگاه توسط روشصهای رایج آزمایشگاهی اندازهصگیری گردید .در انتهای فصل رشد عملکرد مزارع موردنظر به دست آمد .برای استفاده از روشصهای مختلف تفسیر دادهصهای غلظت عناصر غذایی، مزارع گندم به دو گروه دارای عملکرد کم و زیاد تقسیم شدند .در روشصهای DRIS و DOP از روش میانگین عملکرد انحراف معیار استفاده گردید که مقدار عملکرد ۵۲۳۷ کیلوگرم بر هکتار با انحراف معیار ۱۱۹۴ به دست آمد .سپس شاخصصهای تعادل عناصر غذایی در این دو روش محاسبه شدند .نتایج نشان داد که ترتیب نیازمندی در روش DRIS و DOP بهصصورت Zn>Cu=Mn=Fe>P>N>B>K>Ca>Mg و Zn> Cu> Fe> Mn> P> N> K=Ca> Mg> B بود .در روش CND سادک ۱۱ بعدی شامل ۱۰ عنصر غذاییN ،P ،K ،Ca ،Mg ،Fe ،Zn ،Cu ، Mn و B و مقدار پرکننده (R) ایجاد گردید که نسبت لگاریتم غلظت عناصر غذایی (Vx) مورد نظر و توابع تجمعی نسبت واریانس ((Fic(Vx) برای تمام عناصر غذایی محاسبه گردید .برای هر عنصر غذایی نقاط عطف) - b/۳a)منحنیصهای توابع درجه ۳ یک مقدار حداکثر عملکرد داشت که برای تفکیک دو گروه با عملکرد زیاد و کم استفاده شد .در این مطالعه عملکرد میانگین ۴۲۳۲ کیلوگرم بر هکتار برای تفکیـک دو گروه عملکرد کم و زیاد به دست آمد .برای هر یک از نمونهصهای برگ پرچم در زیرگروه عملکرد کم شاخص تعادل ۱۰ عنصر غذایی محاسبه شد .میانگین شاخصصهای تعادل محاسبه شده ترتیب نیازمندی عناصر غذایی را بهصورت Zn>Mn>Fe>N>Mg>P>B>Ca>Cu مشخص کرد .در روش جدید نسبت لگاریتم ایزومتریک با استفاده از روش تقسیمصبندی متوالی دوتایی (SBP) ۱۰ ترکیب ilr برای تعادلصهای بین عناصر غذایی ایجاد گردید .کاربرد سطح زیر منحنی ROC (AUC) با حد پیک ۸۳ درصد، حساسیت ۹۱ درصد و اختصاصی بودن ۸۲ درصد منجر به ایجاد مقدار تفکیککننده عملکرد) پاسخ ۵۳۰۴ (کیلوگرم بر هکتار و حد آستانه پیشصبینیصکننده) فاصله ماهالانوبیس (TN) ۶۶/۴ (شد که نمونهصهای متعادل را از نامتعادل جدا کرد .با آزمون توکی تفاوتصهای معنادار در تعادلصهای عناصر غذایی بین دو گروه مرجع و غیرمرجع مشاهده گردید .آزمون توکی تفاوت معنادار بین اکثر تعادلصها مانند[Fe,Mn,Zn,Cu|B,Mg,Ca,K,P,N] ، [Fe|Mn,Zn,Cu] و [Mn|Zn,Cu] به جز دو تعادل [P|N] و [Mg|Ca] در بین دو گروه TN و TP را نشان داد .در طرح تعادلصهای کفهصترازویی نیز تمایل محورهای عمودی به طرف راست یا چپ در تعادلصهای مشتق شده از SBP با مقادیر میانگین ilr برای دو گروه TN و TP نشان دهنده غالبیت آن تعادل در دو گروه عملکردی TN یا TP بود .با توجه به تفاوت معنادار غلظت عناصر غذاییK ،Fe ، Zn و Cu ارائه شده در پایین دندروگرام تعادل کفهصترازویی در دو گروه TN و TP وجود این عناصر منجربه غیرمتعادل شدن تعادلصهای[Fe|Mn,Zn,Cu] ،[Mn|Zn,Cu] ،[Zn|Cu] ، [Fe,Mn,Zn,Cu|B,Mg,Ca,K,P,N] و [Ca, Mg|K] گردید .پس از مشخص شدن شاخصصهای عناصر غذایی، آزمون اعتبارسنجی مزرعهصای بهصورت آزمایش فاکتوریل و در قالب طرح بلوک کامل تصادفی و تیمارهای Zn (۰ و ۳/۰ درصد(، Fe (۰ و ۳/۰ درصد(، Mn (۰ و ۱/۰ درصد (و Cu (۰ و ۱/۰ درصد (در دو مزرعه و سه تکرار با تعداد کل ۹۶ کرت اجرا گردید .نتیجه آزمون نشان داد که ترتیب نیاز به عناصر غذایی در روش DRIS و DOP بهصورت Mg > P > N = K > Fe = B > Mn = Zn > Ca = Cu و Mg > N > Mn > P > K = Fe = Cu > Zn =B > Ca حاصل گردید بنابراین مطابق این ترتیب، عناصر کمصمصرف در هر دو روش از اولویت کمبود خارج شدند .میانگین شاخص تعادل عناصر غذایی روش DRIS در مطالعه مزرعهصای ۱۰۵ و در آزمون اعتبارسنجی ۱۰۱ مشخص شد و شاخص تعادل عناصر غذایی روش DOP در مطالعه مزرعهصای و آزمون اعتبارسنجی به ترتیب ۲۸۸ و ۲۷۷ گزارش شد .پس از محاسبه شاخصصهای تعادل عناصر غذایی در روش CND ترتیب نیازمندی عناصر غذایی در آزمون اعتبارسنجی به صورت Mn>N>K>P>Ca>Fe>Cu>Mg>Zn>B مشخص گردید .در روشilr ، آزمون توکی اختلاف معناداری از نظر تعادلصهای عناصر غذایی بین دو گروه TN و TP نشان نداد .نتیجه کلی حاصل از این مطالعه تائید روند کلی یکسان تشخیص ترتیب نیازمندی عناصر در سه روشDRIS ، DOP و CND وتشخیص کمبود عناصر غذایی کمصمصرف و عدم تعادل چندگانه عناصر غذایی در دندروگرام تعادل در منطقه مورد مطالعه بود
متن يادداشت
K]. Field validation test was done with a factorial experiment in a randomized complete blocks design with three replications. The factors included Zn (0 and 0.3 ), Fe (0 and 0.3 ), Mn (0 and 1 ) and Cu (0 and 0.1 ) in two fields with a total of 96 plots after determining the indices of nutrients. The result of the validation test showed that the order of the nutrient requirement in the DRIS and DOP method were Mg> P> N = K> Fe = B> Mn = Zn> Ca = Cu and Mg> N> Mn> P> K = Fe = Cu> Zn = B> Ca, respectively. Therefore according to resulted order nutrient requirmentin order in the both DRIS and DOP method, micronutrients exited from priority deficinency. in the DRIS method the NBI from 105 in field study decrease to 101 in validation test and in the DOP method nutrient balance index reported 288 and 277 in the field study and validation test respectively. In the CND method, the concentration of nutrients after the application of micronutrients in the validation test was as follows: Mn>N>K>P>Ca>Fe>Cu>Mg>Zn>B. In the ilr method, Tukey test did not show a significant difference in nutritional balance between TN and TP groups | B, Mg, Ca, K, P, N] and [Ca, Mg | Cu], [Fe, Mn, Zn, Cu | Zn, Cu, Zn | Mn, Zn, Cu], [Mn | Ca] between the two groups of TN and TP. In the pan balance diagram, the lean of vertical axes to the right or left in the balances derived from SBP with mean of ilr for the two groups of TN and TP indicates its dominance in the TN or TP yielding group. Considering the significant difference in the K, Zn and Cu presented in the bottom of the balance dendrogram between TN and TP groups, the presence of these elements results in the imbalance of [Fe | N] and [Mg | Zn, Cu] except for the equilibrium [P | Mn, Zn, Cu] and [Mn | B, Mg, Ca, K, P, N], [Fe | Wheat is the most important product for more than a third of the world's population. The objective of this study was to investigate the wheat nutrients balance of Moghan area using the diagnosis and recommendation integrated system(DRIS), the optimal deviation of optimum percentage method (DOP), the composition nutrient diagnosis method(CND), and the method of isometric log ratio (ilr). After selecting 96 wheat fields, a flag leaf was collected at the booting growth stage and the concentration of nitrogen(N), phosphorus(P), potassium(K), calcium(Ca), magnesium(Mg), iron(Fe), zinc(Zn), copper(Cu), manganese(Mn) and boron(B) in the laboratory were determined by common laboratory methods. At the end of the growing season, the wheat yield was also measured. To use different methods for interpreting nutrient concentration data, wheat fields were divided into two groups with high and low yield. In DRIS and DOP methods, the mean SD were used and the cut-off yield of 5237 kg ha-1 obtained. Then, nutritional balance indices were calculated in DRIS and DOP methods. The results showed that the order of nutrient requirement in DRIS and DOP methods were Zn> Mn = Fe = Cu> N = P> B> K> Ca> Mg and Zn> Cu> Fe> Mn> P> N> K = Ca> Mg> B, respectively. In the CND method, a 11-dimensional simplex of 10 nutrients (N, P, K, Ca, Mg, Cu, Mn, Fe, Zn, B) and filler value (R) were created from which the row-centered log ratio of the desired nutrient concentration (Vx) and cumulative variance ratio function (Fic (Vx)) were calculated. For each nutrient, the inflection point (-b/3a) of the polynomial curves with order of 3 have a maximum yield value, which was used to split the crops into two group of high and low yield. In this method the mean yield was 4232 kg ha-1. The results showed that increasing concentration of nutrients in the flag leaf of reference samples was as follows: Zn> Cu> Fe> Mn> B> P> Mg> Ca> K> N. In the new method of isometric log ratio (ilr) were created 10 ilr combinations for the balances between nutrients using a sequential binary partition (SBP). Application area under curve of ROC (AUC) with 83 peak, 91 sensitivity and 82 specificity caused to obtain yield separating value (response) of 5304 kg ha-1 and predictor threshold (Mahalanobis distance) of 4.66 that discriminated balanced from imbalanced samples. Tukey test was used to determine the significant differences in nutritional balance between the reference and non-reference groups. Tukey test show that there was a significant difference between the majority of equilibria such as [Fe, Mn, Zn, Cu
عنوان اصلی به زبان دیگر
عنوان اصلي به زبان ديگر
Application of compositional nutrient diagnosis (CND) method to assess wheat nutrition status and comparison with the DRIS and DOP methods and validation of obtained norms case study: (field of Moghan Agro Industrial Company)
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )