فعال سازی و اصلاح سطحی کنسانتره نفلین سینیت به منظور حذف مواد رنگ زا از محیط های آبی
نام نخستين پديدآور
حامد ابراهیم پور تیمورلویی
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
مهندسی شیمی و نفت
تاریخ نشرو بخش و غیره
۱۴۰۱
مشخصات ظاهری
نام خاص و کميت اثر
۸۵ص.
مواد همراه اثر
سی دی
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
کارشناسی ارشد
نظم درجات
مهندسی شیمی گرایش طراحی فرایند
زمان اعطا مدرک
۱۴۰۱/۱۱/۱۸
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
ﻧﻔﻠﻴﻦﺳﻴﻨﻴﺖ ﻳﻚ ﺳﻨﮓ آذرﻳﻦ می¬باشد و برای اولین بار از آن به عنوان جاذب برای حذف رنگ¬های متیلن¬بلو و کریستال¬ویولت استفاده شد. در این مطالعه با استفاده از عامل فعال¬ساز پتاسیم هیدروکسید، سطح ﻧﻔﻠﻴﻦﺳﻴﻨﻴﺖ فعال¬شد. سپس جهت بررسی خصوصیات ساختاری و سطحی جاذب از آنالیزهای متعددی نظیر XRF، FT-IR، XRD، SEM و EDX استفاده شد. تاثیر پارامترهای غلظت اولیه¬ رنگ¬های متیلن¬بلو و کریستال¬ویولت در محلول، pH محلول، مقدارجاذب، دما و زمان تماس بر میزان بازدهی فرآیند جذب سطحی رنگ¬های متیلن¬بلو و کریستال¬ویولت بررسی شد. بیشترین جذب رنگ¬های متیلن¬بلو و کریستال¬ویولت در مقدارجاذب 2 گرم بر لیتر، pH برابر با 8، زمان تماس 90 دقیقه، غلظت اولیه رنگ¬های متیلن¬بلو و کریستال¬ویولت مقدار 20 میلی¬گرم بر لیتر، دما 25 درجه سانتی¬گراد و میزان بازدهی فرآیند در شرایط بهینه 92 درصد محاسبه شد. بررسی-های ترمودینامیکی نمایان ساخت که میزان جذب رنگ¬های متیلن¬بلو و کریستال¬ویولت با افزایش دما کمتر می¬گردد که نشان¬دهنده گرماده بودن فرآیند جذب است. شرایط سینتیکی جذب، با مدل¬های سینتیک شبه ¬مرتبه اول و شبه ¬مرتبه دوم بررسی شد و نتایج به دست آمده نشان داد که فرآیند جذب متیلن¬بلو و کریستال¬ویولت از مدل سینتیک شبه مرتبه اول تبعیت می¬کند. ایزوترم فرآیند جذب با استفاده از مدل¬های لانگمویر، فروندلیچ، تمکین و دوبینین- رادشکویچ مورد بررسی قرار گرفت. مدل ایزوترم دوبینین-رادشکوویچ با داده¬های تجربی فرآیند جذب مطابقت بیش¬تری داشت و بیش¬ترین ظرفیت جذب توسط ایزوترم دوبینین-رادشکوویچ برای متیلن¬بلو و کریستال¬ویولت به-ترتیب 74/21 و 54/18 میلی¬گرم جذب¬شونده بر گرم جاذب محاسبه شد.
متن يادداشت
Abstract: Nephelinsinite is an igneous rock, and it was used for the first time as an absorbent to remove methylene blue and crystal violet dyes. In this study, the surface of nephelincinite was first modified by using the activator potassium hydroxide. Several analyses such as XRF, FT-IR, XRD, SEM, and EDX were used to investigate the structural and surface characteristics of the absorbent. The effect of the initial concentration parameters of methylene blue and crystal violet dyes in the solution, solution pH, amount of adsorbent, temperature, and contact time on the efficiency of the surface absorption process of methylene blue and crystal violet dyes was investigated. The maximum absorption of methylene blue and crystal violet dyes was calculated to be % in the absorbent amount of g/liter, pH equal to , contact time of minutes, initial concentration of methylene blue and crystal violet dyes of mg/liter, temperature of °C, and process efficiency under optimal conditions. Thermodynamic studies showed that the absorption rate of methylene blue and crystal violet dyes decreased with increasing temperature, which indicates that the absorption process is exothermic. The kinetic conditions of absorption were investigated with pseudo-first-order and pseudo-second-order kinetic models, and the obtained results showed that the absorption process of methylene blue and crystal violet obeys the pseudo-first-order kinetic model. The isotherm of the adsorption process was investigated using the Langmuir, Freundlich, Temkin, and Dubinin-Radeshkevich models. The Dubinin-Radeshkovich isotherm model was more consistent with the experimental data of the adsorption process, and the maximum adsorption capacities by the Dubinin-Radeshkovich isotherm for methylene blue and crystal violet were mg/g and mg/g, respectively.
عنوانهای گونه گون دیگر
عنوان گونه گون
Activation and surface modification of nepheline syenite concentrate to remove dyes from aqueous media
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )